Skip to content

Maintenance Guide for Robotic Pool Cleaners

Robotic pool cleaners are amazing devices that can make your pool maintenance routine much easier and more efficient. They can scrub, vacuum, and filter your pool water, leaving it sparkling clean and healthy. However, like any other piece of equipment, they require proper care and maintenance to ensure they continue to function effectively and last for a long time. In this blog post, we will provide you with some essential tips on how to maintain and care for your robotic pool cleaner.

Cleaning the Filter

One of the most important parts of your robotic pool cleaner is the filter. The filter is responsible for trapping and removing debris, dirt, and algae from your pool water. However, over time, the filter can become clogged and reduce the performance of your cleaner. Therefore, it is essential to clean the filter regularly, especially if you use your robotic pool cleaner frequently.

To clean the filter, you need to first remove it from the cleaner. The process of removing the filter may vary depending on the model of your cleaner, so refer to the manufacturer’s instructions for specific steps. In general, you will need to:

  • Turn off the power to the robotic pool cleaner and unplug it from the electrical outlet.
  • Locate the filter compartment on the cleaner.
  • Open the filter compartment and remove the filter.

Once you have removed the filter, you need to clean it. There are different types of filters, such as filter bags or filter cartridges, and they may require different cleaning methods. Again, refer to the manufacturer’s instructions for specific guidance. In general, you will need to:

  • Remove any large debris from the filter, such as leaves or twigs.
  • Rinse the filter with a hose to remove any remaining debris.
  • Rinse the filter thoroughly with a hose to remove any remaining cleaner.
  • Allow the filter to dry completely before reinstalling it in the cleaner.

It is important to clean the filter regularly, as a dirty filter can reduce the performance of your cleaner and even damage it over time. By following these simple steps, you can keep your filter in good condition and ensure optimal cleaning results.

Cleaning the Brushes

Another essential part of your robotic pool cleaner is the brushes. The brushes are responsible for scrubbing and loosening the dirt and algae from your pool surfaces. However, over time, the brushes can wear out and lose their effectiveness. Therefore, it is important to inspect and clean the brushes regularly, and replace them when necessary.

To clean the brushes, you need to first remove them from the cleaner. The process of removing the brushes may vary depending on the model of your cleaner, but it usually involves removing the brush caps and pulling the brushes out of their slots.

Once you have removed the brushes, you need to clean them. You can use a soft brush or cloth to wipe off any dirt or debris from the brushes. You can also use a mild detergent and water to wash the brushes, but make sure to rinse them well and let them dry completely before reinstalling them.

It is important to clean the brushes regularly, as dirty brushes can reduce the effectiveness of your cleaner and even scratch your pool surfaces. By following these simple steps, you can keep your brushes in good shape and ensure thorough cleaning results.

Cleaning the Tracks

Another important part of your robotic pool cleaner is the tracks. The tracks are responsible for moving the cleaner around your pool. However, over time, the tracks can accumulate dirt and debris, which can affect the mobility and stability of your cleaner. Therefore, it is important to inspect and clean the tracks regularly, and replace them when necessary.

To clean the tracks, you need to first remove them from the cleaner. The process of removing the tracks may vary depending on the model of your cleaner, but it usually involves unscrewing the track covers and sliding the tracks off the wheels.

Once you have removed the tracks, you need to clean them. You can use a hose to spray off any dirt or debris from the tracks. You can also use a mild detergent and water to wash the tracks, but make sure to rinse them well and let them dry completely before reinstalling them.

It is important to clean the tracks regularly, as dirty tracks can affect the performance and safety of your cleaner. By following these simple steps, you can keep your tracks in good condition and ensure smooth and stable movement.

Storing the Cleaner

The last but not least tip for maintaining your robotic pool cleaner is to store it correctly. When not in use, you should store your cleaner in a cool, dry, and shaded place, away from direct sunlight, heat, and moisture. This will help prevent damage to the cleaner and extend its lifespan.

You should also avoid leaving your cleaner in the pool for long periods of time, as this can expose it to chemicals, algae, and other harmful elements. You should only use your cleaner when needed, and remove it from the pool after each cleaning cycle.

Additionally, you should avoid coiling or twisting the power cord of your cleaner, as this can cause kinks or breaks in the cord. You should gently straighten the cord and hang it on a hook or a rack, away from the ground and any sharp objects.

By following these simple steps, you can store your cleaner properly and protect it from any potential damage.

Conclusion

Robotic pool cleaners are great devices that can make your pool maintenance routine much easier and more efficient. However, they also require proper care and maintenance to ensure they continue to function effectively and last for a long time. By following the tips we have provided in this blog post, you can keep your robotic pool cleaner in good shape and enjoy its benefits for many years to come. We hope you found this blog post helpful and informative. If you have any questions or comments, feel free to leave them below. Thank you for reading and happy pool cleaning!

0 Comments

There are no comments yet. Be the first one to post one!

Leave a comment

Please note, comments must be approved before they are published.